Conserte seus objetos Comunidade Loja

Philips Sonicare DiamondClean Circuit Board Replacement

O que você precisa

  1. Philips Sonicare DiamondClean Circuit Board Replacement, Circuit Board: passo 1, imagem 1 %32 Philips Sonicare DiamondClean Circuit Board Replacement, Circuit Board: passo 1, imagem 2 %32

    • Pull the brush head from the toothbrush.

    Editar

  2. Philips Sonicare DiamondClean Circuit Board Replacement: passo 2, imagem 1 %32

    • Use a spudger to pry the chrome cap from the base of the toothbrush.

    Editar

  4. Philips Sonicare DiamondClean Circuit Board Replacement: passo 3, imagem 1 %32 Philips Sonicare DiamondClean Circuit Board Replacement: passo 3, imagem 2 %32 Philips Sonicare DiamondClean Circuit Board Replacement: passo 3, imagem 3 %32

    • Invert the toothbrush and apply pressure against the metal tip until the internals and casing separate.

    • Remove the internals from the casing.

    Editar

  5. Philips Sonicare DiamondClean Circuit Board Replacement: passo 4, imagem 1 %32

    • Remove the rubber covers from the circuit board and battery.

    Editar

  6. Philips Sonicare DiamondClean Circuit Board Replacement: passo 5, imagem 1 %32

    • Carefully free the top end of the circuit board from the plastic clips holding it in place.

    Editar

  7. Philips Sonicare DiamondClean Circuit Board Replacement: passo 6, imagem 1 %32

    • Use the soldering iron to desolder the terminals marked F1, C5, R7, R6, and JP1.

    • Check out our How to Solder and Desolder Connections guide for help with soldering best practices!

    • Remove the circuit board.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 11

Últimos 30 dias: 68

Duração total: 2,684