Peças

Não são necessárias peças.

  1. Remove 3 screws running along back edge of case cover.
    • Remove 3 screws running along back edge of case cover.

    • Remove 2 screws from each side of case cover.

    Adicionar comentário

  2. Grab edges of cover, pull outward slightly, and pull straight up.
    • Grab edges of cover, pull outward slightly, and pull straight up.

    Adicionar comentário

    • Lift up the 5 tabs securing the front panel to the chassis. There are 3 on the bottom, and 2 on the inside edges of the panel. Panel should then lift off the player.

    Adicionar comentário

    • Grip jogger dial and lift up. It should come off easily.

    Adicionar comentário

    • Remove 4 mounting screws as shown.

    • Unscrew and save brass tab.

    • Push in 2 plastic retainers and lift out.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Kevin

Member since: 26-04-2011

351 reputação

8 Guides authored

Equipe

Cal Poly, Team 18-20, Garner Spring 2011 Membro de Cal Poly, Team 18-20, Garner Spring 2011

CPSU-GARNER-S11S18G20

4 Membros

11 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 4

Todo: 2,037