Introdução
Use this guide to replace the keypad on a Palm Zire 21.
O que você precisa
-
-
Remove the two 0.8 mm screws located on the back of the device.
Pergunte ao FixBot
-
-
Ferramenta utilizada neste passo:Tweezers$4.99
-
Using tweezers, or something similar flip up the tab, releasing the wires located under the flap.
-
-
-
-
Remove the two screws located at the bottom of the mothership, using a Philips head screwdriver.
-
-
-
Carefully remove the mother board by lifting up, exposing the keypad.
-
-
-
Using tweezers, or something similar remove the keypad from the device and replace with a new one.
-
To reassemble your device, follow these instructions in reverse order.
Cancelar: não concluí este guia.
Uma outra pessoa concluiu este guia.
Equipe
USF Sarasota-Manatee, Team 1-1, Stewart Fall 2014 Membro de USF Sarasota-Manatee, Team 1-1, Stewart Fall 2014
USFSM-STEWART-F14S1G1
3 Membros
Autoria de 7 guias
