Press the button located just above the Sprint™ logo then slide the cover down. Press the button located just above the Sprint™ logo then slide the cover down. Press the button located just above the Sprint™ logo then slide the cover down.
  • Press the button located just above the Sprint™ logo then slide the cover down.

Adicionar comentário

Use the small notch on the left hand side of the phone to remove the battery. Use the small notch on the left hand side of the phone to remove the battery.
  • Use the small notch on the left hand side of the phone to remove the battery.

Adicionar comentário

Remove the stylus from the phone.
  • Remove the stylus from the phone.

Adicionar comentário

After removing the battery and stylus, unscrew the 5 Torx screws (using a T-5 Torx screw driver)
  • After removing the battery and stylus, unscrew the 5 Torx screws (using a T-5 Torx screw driver)

Adicionar comentário

Using the spudger, remove the small rubberized patch under the antenna.
  • Using the spudger, remove the small rubberized patch under the antenna.

Adicionar comentário

Unscrew the last two screws using the previous screw driver.
  • Unscrew the last two screws using the previous screw driver.

Adicionar comentário

Using the plastic opening tool, gently separate the back case from the phone body. Using the plastic opening tool, gently separate the back case from the phone body.
  • Using the plastic opening tool, gently separate the back case from the phone body.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

James Smith

Member since: 27-04-2012

1 reputação

6 Guides authored

Equipe

Cal Poly, Team 12-37, Regan Spring 2012 Membro de Cal Poly, Team 12-37, Regan Spring 2012

CPSU-REGAN-S12S12G37

4 Membros

14 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 566