OLPC XO-4 Touch Screen Replacement

Turn the laptop upside-down, with the handle facing away from you.

Pull the lock tabs towards the green outer edges of the laptop.

Hold the left lock tab in the unlock position until the battery is completely removed in the next step.

Lift up on the middle of the battery to remove it from the device.

Remove the two 4mm Phillips #1 screws underneath the screen on the right-hand side.

Rotate the screen 180° and remove the other two screws.

Remove the green side panel by pressing down on the small green button on the top and sliding the panel up.

Repeat the step above for the panel on the other side.

Gently lift up the lower part of the frame and pull it down to free the screen frame.

Lift the black connector and pull the ribbon cable out by the purple tab, freeing the frame.

Remove the four 7.62mm screws using a Phillips #1 screwdriver.

Carefully lift the screen out.

For each ribbon cable, lift up the black connector and gently pull the ribbon cables out by the plastic tabs.

Remove the screen from the laptop.