Pular para o conteúdo principal

Introdução

After many charging cycles, your battery can wear out and eventually lose its ability to hold charge. When that happens, you will need to replace the battery to keep using your Mifi.

Ferramentas

Nenhuma ferramenta especificada.

Peças

  1. Remove the rear cover by pressing down on the cover and pulling it away from the device.
    • Remove the rear cover by pressing down on the cover and pulling it away from the device.

  2. Place your finger on the back of the battery located near the edge of the device.
    • Place your finger on the back of the battery located near the edge of the device.

    • Push your finger into the battery and lift up to pop the battery out of the device.

  3. Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now

    Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now
  4. Insert the new battery into the battery slot.
    • Insert the new battery into the battery slot.

    • Make sure to place the battery in with the white arrows facing inward.

  5. Re-install the rear cover by placing the inward end in it's slot. Push down on the cover while sliding it into the slot to snap it back into place.
    • Re-install the rear cover by placing the inward end in it's slot.

    • Push down on the cover while sliding it into the slot to snap it back into place.

Conclusão

Charge your new battery and you are ready to use your Mifi again.

Uma outra pessoa concluiu este guia.

Carissah

Membro desde: 15-04-2012

147 reputação

2 Guias de autoria

Equipe

Cal Poly, Team 7-36, Maness Spring 2012 Membro de Cal Poly, Team 7-36, Maness Spring 2012

CPSU-MANESS-S12S7G36

5 Membros

5 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 6

Todo: 717