Introdução

Removing the speaker requires opening the case of the Wii Remote.

Peças

Não são necessárias peças.

  1. Flip the Wii Remote over so the battery cover faces you.
    • Flip the Wii Remote over so the battery cover faces you.

    • Push up on the bottom tab.

    • Remove the battery cover.

    Adicionar comentário

  2. Remove the first battery by pressing down on the positive end and pulling the battery out.
    • Remove the first battery by pressing down on the positive end and pulling the battery out.

    • Remove the second battery by pushing up on the positive end and pulling the battery out.

    Adicionar comentário

    • Using a Tri-wing Y1 Screwdriver, remove the two center 7mm screws by turning them counterclockwise.

    • Repeat with the two bottom screws.

    Adicionar comentário

    • With the flat end of a spudger, gently apply pressure to the tabs located on left side of the controller.

      • These tabs are breakable. However, if the tabs are broken the controller will still function.

    • Open the front plate like a book.

      • Small parts may fall out as you open the front plate.

    Adicionar comentário

    • Place the plastic opening tool between the edge of the speaker and the wii remote.

    • Gently lift the speaker out of the body of the Wii remote.

    In my Wii controller, the speaker is connected to two cables instead of touching the motherboard.

    Santi12008 - Responder

Conclusão

To reassemble your device, follow these instructions in reverse order.

Emily

Member since: 14-04-2013

646 reputação

6 Guides authored

Equipe

Cal Poly, Team 3-44, Amido Spring 2013 Membro de Cal Poly, Team 3-44, Amido Spring 2013

CPSU-AMIDO-S13S3G44

4 Membros

6 Guides authored

Thank you, u help me to fix it.

joon lew - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 8

Últimos 30 dias: 38

Todo: 2,824