Participe da comunidade de reparos - Criar conta

Introdução

This is a guide on how to replace the battery from inside the NexiGo NS32. There are 5 specific steps in this guide that describe how to take the battery out of the controller. Be careful not to damage any of the internal components.

O que você precisa

Passo 1 Rear Case

NexiGo NS32 Battery Replacement, Rear Case: passo 1, imagem 1 %32

Orient the controller so that it is face down.

Editar

Passo 2

Remove the eight 9 mm Phillips screws that secure the rear case.

Editar

Passo 3

Lift the rear case up and off.
You may need to use an opening tool to help release the rear case, but avoid using excessive force so you don't damage the controller.

Editar

Passo 4 Battery

NexiGo NS32 Battery Replacement, Battery: passo 4, imagem 1 %32

NexiGo NS32 Battery Replacement, Battery: passo 4, imagem 2 %32

Grip the white battery connector and pull it directly out of its motherboard socket.
This may require some force, as the connectors are secured with a bit of adhesive. If you're having trouble with disconnection, apply some high-concentration isopropyl alcohol to the adhesive to loosen it.
Do not pull on the wires.