Ir para o conteúdo principal

Introdução

Use this guide to replace the battery.

  1. Power off your device before beginning disassembly.
    • Power off your device before beginning disassembly.

    • Insert plastic opening tool and pry back case away from the device, slowly moving the plastic opening tool along the device.

  2. Follow the red and black wires from the battery to where they are soldered to the motherboard.
    • Follow the red and black wires from the battery to where they are soldered to the motherboard.

    • Warning: Use caution when handling a soldering iron to avoid injury or damage.

    • Use a soldering iron to separate the positive and negative wires from the motherboard.

    • For a complete guide on how to solder, click here.

  3. Insert plastic spudger under the battery and slide back and forth, separating the battery from the case. Insert plastic spudger under the battery and slide back and forth, separating the battery from the case.
    • Insert plastic spudger under the battery and slide back and forth, separating the battery from the case.

Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas concluíram este guia.

Eric Fiske

Membro desde: 09/02/2016

430 Reputação

2 Guias de autoria

Equipe

USF Tampa, Team 7-1, Cheng Spring 2016 Membro de USF Tampa, Team 7-1, Cheng Spring 2016

USFT-CHENG-S16S7G1

3 Membros

10 Guias de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 1,848