/
DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Cadastre-se
Login
Junte-se à maior comunidade de reparos do mundo
Peças
GuiasRespostas
Editar
NETGEAR WGT624 v3 Reset Button Replacement

NETGEAR WGT624 v3 Reset Button Replacement

Jonathon Sather

Jonathon Sather e 5 outros colaboradores

Última atualização em February 4, 2023

Nenhuma estimativa
Moderado

Introdução

Ir para o passo 1

Removing the reset button will allow you to replace it if it is not functioning properly.

O que você precisa

Ferramentas

Exibir mais…

  1. NETGEAR WGT624 v3 Reset Button Replacement, Lower Case: passo 1, imagem 1 %32

    • Turn the device so that the bottom is facing up.

    Editar

  2. NETGEAR WGT624 v3 Reset Button Replacement: passo 2, imagem 1 %32 NETGEAR WGT624 v3 Reset Button Replacement: passo 2, imagem 2 %32 NETGEAR WGT624 v3 Reset Button Replacement: passo 2, imagem 3 %32

    • Use the plastic opening tool to carefully lift the rubber stops in each corner.

    • Do not completely remove the rubber stops, because they are difficult to replace.

    Editar

  3. NETGEAR WGT624 v3 Reset Button Replacement: passo 3, imagem 1 %32 NETGEAR WGT624 v3 Reset Button Replacement: passo 3, imagem 2 %32

    • Unscrew the 4 11.8 mm T-8 Torx screws from each corner of the device.

    Editar

  4. NETGEAR WGT624 v3 Reset Button Replacement: passo 4, imagem 1 %32 NETGEAR WGT624 v3 Reset Button Replacement: passo 4, imagem 2 %32

    • Lift the lower case straight up from the rest of the router.

    Editar

  5. NETGEAR WGT624 v3 Reset Button Replacement, Motherboard: passo 5, imagem 1 %32 NETGEAR WGT624 v3 Reset Button Replacement, Motherboard: passo 5, imagem 2 %32

    • Remove the clear plastic casing by lifting it straight up from the router.

    Editar

  7. NETGEAR WGT624 v3 Reset Button Replacement: passo 6, imagem 1 %32 NETGEAR WGT624 v3 Reset Button Replacement: passo 6, imagem 2 %32

    • Separate the motherboard from the top shell by lifting it straight up from the router.

    Editar

  8. NETGEAR WGT624 v3 Reset Button Replacement, Antenna: passo 7, imagem 1 %32

    • Turn the motherboard, so that the top is facing upwards.

    • Place the motherboard on a clean flat surface.

    Editar

  9. NETGEAR WGT624 v3 Reset Button Replacement: passo 8, imagem 1 %32 NETGEAR WGT624 v3 Reset Button Replacement: passo 8, imagem 2 %32

    • Remove the yellow tape that holds the wire.

    • Make sure that you set the tape aside on a clean surface, so that it can be reused.

    Editar

  10. NETGEAR WGT624 v3 Reset Button Replacement: passo 9, imagem 1 %32 NETGEAR WGT624 v3 Reset Button Replacement: passo 9, imagem 2 %32 NETGEAR WGT624 v3 Reset Button Replacement: passo 9, imagem 3 %32
    Ferramenta utilizada neste passo:
    Tweezers
    $4.99
    Adicionar ao carrinho

    • Use tweezers to gently pull the metal bracket that connects the antenna to the motherboard.

    • The wire should now be completely separate from the motherboard.

    Editar

  11. NETGEAR WGT624 v3 Reset Button Replacement: passo 10, imagem 1 %32

    • Extend the antenna away from the device, so that it becomes straight.

    Editar

  12. NETGEAR WGT624 v3 Reset Button Replacement: passo 11, imagem 1 %32 NETGEAR WGT624 v3 Reset Button Replacement: passo 11, imagem 2 %32 NETGEAR WGT624 v3 Reset Button Replacement: passo 11, imagem 3 %32

    • Find the clips that hold the antenna onto the router.

    • Use one hand to push the clips in, while using your other hand to pull out the antenna. You may need to gently twist the antenna so it can separate from the hole.

    • The antenna may take considerable force to remove.

    Editar

  13. NETGEAR WGT624 v3 Reset Button Replacement: passo 12, imagem 1 %32

    • Completely separate the antenna and wire from the rest of the device.

    Editar

  14. NETGEAR WGT624 v3 Reset Button Replacement, Reset Button: passo 13, imagem 1 %32 NETGEAR WGT624 v3 Reset Button Replacement, Reset Button: passo 13, imagem 2 %32

    • Remove the metal frame.

    Editar

  15. NETGEAR WGT624 v3 Reset Button Replacement: passo 14, imagem 1 %32

    • Turn over the motherboard.

    Editar

  16. NETGEAR WGT624 v3 Reset Button Replacement: passo 15, imagem 1 %32

    • Do not refer to the pictures in this step for correct soldering and de-soldering techniques. They are solely for illustration purposes.

    • Desolder the four connections between the reset button and the motherboard

    • For proper soldering and desoldering techniques, refer here.

    • Pull the reset button from the other side of the mother board once the solder is liquid.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor(a)

com 5 outros contribuidores

Jonathon Sather

Membro desde: 01/23/13

45 Reputação

Autoria de 3 guias

Emblemas: 5

+2 outros emblemas

Equipe

Cal Poly, Team 3-31, Amido Winter 2013 Membro de Cal Poly, Team 3-31, Amido Winter 2013

CPSU-AMIDO-W13S3G31

3 Membros

Autoria de 12 guias

0Comentários do guia

Comentar

Visualizações:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Ao todo: 816