Ir para o conteúdo principal

Munchkin Mozart Magic Cube Speaker Replacement

O que você precisa

  1. Munchkin Mozart Magic Cube Speaker Replacement, Face plate: passo 1, imagem 1 %32 Munchkin Mozart Magic Cube Speaker Replacement, Face plate: passo 1, imagem 2 %32
    • Remove two 6 mm Phillips #2 screws on either side of the On/Off Plate.

  2. Munchkin Mozart Magic Cube Speaker Replacement: passo 2, imagem 1 %32
    • Remove the On/Off switch plate and save the screws so you can use them later to put the plate back on.

  3. Munchkin Mozart Magic Cube Speaker Replacement: passo 3, imagem 1 %32
    • Gently pull out the battery cartridge and if needed, replace the batteries with 3 AA alkaline batteries.

  4. Munchkin Mozart Magic Cube Speaker Replacement: passo 4, imagem 1 %32
    • Starting with the yellow face, insert the metal spudger between the yellow face and the white frame, prying the frame apart.

  5. Munchkin Mozart Magic Cube Speaker Replacement: passo 5, imagem 1 %32
    • Insert the metal spudger in the space created by the plastic opening tool between the frame and face of the cube.

    • Pry the cube face from the frame.

  6. Munchkin Mozart Magic Cube Speaker Replacement: passo 6, imagem 1 %32
    • After removing the square plates, you can unscrew the screws underneath.

    • Remove four 6 mm Phillips #2 screws, located on the sides.

  7. Munchkin Mozart Magic Cube Speaker Replacement: passo 7, imagem 1 %32
    • Remove the rubber corners by simply pulling them off.

  8. Munchkin Mozart Magic Cube Speaker Replacement, Frame Removal: passo 8, imagem 1 %32
    • Remove twenty-four 6 mm Phillips #2 from all 6 sides.

    • Once the screws are removed, gently pull apart the frame.

  9. Munchkin Mozart Magic Cube Speaker Replacement, Speaker: passo 9, imagem 1 %32
    • Remove four 6 mm Phillips #2 screws that hold down the speaker to its plastic frame.

  10. Munchkin Mozart Magic Cube Speaker Replacement: passo 10, imagem 1 %32
    • Remove two 6 mm Phillips #2 screws holding down the main motherboard to plastic frame.

  11. Munchkin Mozart Magic Cube Speaker Replacement: passo 11, imagem 1 %32
    • Gently remove speaker and motherboard from plastic frame.

  12. Munchkin Mozart Magic Cube Speaker Replacement: passo 12, imagem 1 %32
  13. Munchkin Mozart Magic Cube Speaker Replacement: passo 13, imagem 1 %32
    • Desolder speaker cable connections from the motherboard.

    • If you're unsure which metal connector to unsolder note that SPK is written next to the metal spot,

Conclusão

To reassemble your device, follow these instructions in reverse order.

Paula Campos

Membro desde: 08/27/15

126 Reputação

Autoria de 1 guia

Equipe

USF Tampa, Team 1-4, Sullivan Fall 2015 Membro de USF Tampa, Team 1-4, Sullivan Fall 2015

USFT-SULLIVAN-F15S1G4

Membros da 4

Autoria de 14 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 6

Duração total: 995