Conserte seus objetos Comunidade Loja

Munchkin Mozart Magic Cube On-Off Switch Replacement

O que você precisa

  1. Munchkin Mozart Magic Cube On-Off Switch Replacement, Face plate: passo 1, imagem 1 %32 Munchkin Mozart Magic Cube On-Off Switch Replacement, Face plate: passo 1, imagem 2 %32

    • Remove two 6 mm Phillips #2 screws on either side of the On/Off Plate.

    Editar

  2. Munchkin Mozart Magic Cube On-Off Switch Replacement: passo 2, imagem 1 %32

    • Remove the On/Off switch plate and save the screws so you can use them later to put the plate back on.

    Editar

  3. Munchkin Mozart Magic Cube On-Off Switch Replacement: passo 3, imagem 1 %32

    • Gently pull out the battery cartridge and if needed, replace the batteries with 3 AA alkaline batteries.

    Editar

  4. Munchkin Mozart Magic Cube On-Off Switch Replacement: passo 4, imagem 1 %32

    • Starting with the yellow face, insert the metal spudger between the yellow face and the white frame, prying the frame apart.

    Editar

  6. Munchkin Mozart Magic Cube On-Off Switch Replacement: passo 5, imagem 1 %32

    • Insert the metal spudger in the space created by the plastic opening tool between the frame and face of the cube.

    • Pry the cube face from the frame.

    Editar

  7. Munchkin Mozart Magic Cube On-Off Switch Replacement: passo 6, imagem 1 %32

    • After removing the square plates, you can unscrew the screws underneath.

    • Remove four 6 mm Phillips #2 screws, located on the sides.

    Editar

  8. Munchkin Mozart Magic Cube On-Off Switch Replacement: passo 7, imagem 1 %32

    • Remove the rubber corners by simply pulling them off.

    Editar

  9. Munchkin Mozart Magic Cube On-Off Switch Replacement, Frame Removal: passo 8, imagem 1 %32

    • Remove twenty-four 6 mm Phillips #2 from all 6 sides.

    • Once the screws are removed, gently pull apart the frame.

    Editar

  10. Munchkin Mozart Magic Cube On-Off Switch Replacement, On-Off Switch: passo 9, imagem 1 %32

    • Locate frame piece with battery pack and on-off switch, then remove two 6 mm Phillips #2 screws, located on either side of the battery pack.

    • Once removed, the on-off switch will easily slide out of position

    Editar

  11. Munchkin Mozart Magic Cube On-Off Switch Replacement: passo 10, imagem 1 %32

    • To disconnect the on-off switch, carefully desolder the connecting points and remove the switch.

    • Place the new switch into position, and solder back into place.

    • For soldering instructions please see this additional guide Como soldar e dessoldar contatos

    Editar

  12. Munchkin Mozart Magic Cube On-Off Switch Replacement: passo 11, imagem 1 %32

    • To reinstall the switch, first place it back into position.

    • Insert the battery pack back into facing the correct way back into int battery pack slot.

    • Lastly, using the Phillips head screw driver to screw the screws back into place.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 5 outros contribuidores

Panos Valavanis

Membro desde: 08/27/15

275 Reputação

Autoria de 2 guias

Emblemas: 13

+10 outros emblemas

Equipe

USF Tampa, Team 1-4, Sullivan Fall 2015 Membro de USF Tampa, Team 1-4, Sullivan Fall 2015

USFT-SULLIVAN-F15S1G4

Membros da 4

Autoria de 14 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 4

Duração total: 579