Ir para o conteúdo principal

Munchkin Mozart Magic Cube Light Replacement

O que você precisa

  1. Munchkin Mozart Magic Cube Light Replacement, Face plate: passo 1, imagem 1 %32 Munchkin Mozart Magic Cube Light Replacement, Face plate: passo 1, imagem 2 %32
    • Remove two 6 mm Phillips #2 screws on either side of the On/Off Plate.

  2. Munchkin Mozart Magic Cube Light Replacement: passo 2, imagem 1 %32
    • Remove the On/Off switch plate and save the screws so you can use them later to put the plate back on.

  3. Munchkin Mozart Magic Cube Light Replacement: passo 3, imagem 1 %32
    • Gently pull out the battery cartridge and if needed, replace the batteries with 3 AA alkaline batteries.

  4. Munchkin Mozart Magic Cube Light Replacement: passo 4, imagem 1 %32
    • Starting with the yellow face, insert the metal spudger between the yellow face and the white frame, prying the frame apart.

  5. Munchkin Mozart Magic Cube Light Replacement: passo 5, imagem 1 %32
    • Insert the metal spudger in the space created by the plastic opening tool between the frame and face of the cube.

    • Pry the cube face from the frame.

  6. Munchkin Mozart Magic Cube Light Replacement: passo 6, imagem 1 %32
    • After removing the square plates, you can unscrew the screws underneath.

    • Remove four 6 mm Phillips #2 screws, located on the sides.

  7. Munchkin Mozart Magic Cube Light Replacement: passo 7, imagem 1 %32
    • Remove the rubber corners by simply pulling them off.

  8. Munchkin Mozart Magic Cube Light Replacement, Frame Removal: passo 8, imagem 1 %32
    • Remove twenty-four 6 mm Phillips #2 from all 6 sides.

    • Once the screws are removed, gently pull apart the frame.

  9. Munchkin Mozart Magic Cube Light Replacement, Light: passo 9, imagem 1 %32
    • Flip the frame over so that green motherboard over so that the LED is face down and the brown side of the motherboard is face up.

    • Use the Jimmy to remove the glue connecting the motherboard to the white frame.

  10. Munchkin Mozart Magic Cube Light Replacement: passo 10, imagem 1 %32
    • Slide the motherboard out of the frame.

  11. Munchkin Mozart Magic Cube Light Replacement: passo 11, imagem 1 %32
    • Use the soldering iron to desolder the LED by applying heat to the half sphere like connections.

    • For soldering instructions please see this additional guide Como soldar e dessoldar contatos

  12. Munchkin Mozart Magic Cube Light Replacement: passo 12, imagem 1 %32
    • Take the new LED and solder the two legs back to the motherboard.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Equipe

USF Tampa, Team 1-4, Sullivan Fall 2015 Membro de USF Tampa, Team 1-4, Sullivan Fall 2015

USFT-SULLIVAN-F15S1G4

Membros da 4

Autoria de 14 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 464