Introdução

If you determine that your tire is flat due to a ruptured or damaged inner tube this guide will help you replace the inner tube.

Ferramentas

Peças

  1. Flip the bicycle upside down so that the bicycle rests on the seat and handlebars. The bike should be able to stay standing on its own.
    • Flip the bicycle upside down so that the bicycle rests on the seat and handlebars. The bike should be able to stay standing on its own.

    Adicionar comentário

  2. Using a 15mm wrech, loosen the axial nut.
    • Using a 15mm wrech, loosen the axial nut.

    Adicionar comentário

    • Pull the chain slack and remove the tire.

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Insert the flat side of the tire lever between the inside edge of the rim and the seal of the tire.

    • Clip the tire lever to the nearest spoke.

    Adicionar comentário

    • Insert the second tire lever next to first and slowly slide it along the outside edge of the rim until one side of the tire is off the rim.

    Adicionar comentário

    • Re-insert the first tire lever to hook the opposite seam of the tire and repeat steps 3 through 5.

    Adicionar comentário

    • Remove the cap from the inner tube, and pull the valve stem out of the rim.

    Adicionar comentário

Conclusão

To install new inner tube, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Samantha Rawlins

Member since: 21-01-2014

410 reputação

3 Guides authored

Equipe

Cal Poly, Team 1-40, Maness Winter 2014 Membro de Cal Poly, Team 1-40, Maness Winter 2014

CPSU-MANESS-W14S1G40

4 Membros

5 Guides authored

Replace also means how to put it back together!

ellik - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 1

Últimos 30 dias: 11

Todo: 3,390