Introdução

Replacement of the TF6's dust cover is necessary when it is cracked or broken. Replacement dust covers can be obtained from any Mr. Coffee TF series coffeemaker or online at Mr. Coffee's website.

Ferramentas

Não são necessárias ferramentas.

Peças

  1. Facing the front of the TF6, gently lift the dust cover along its hinge until it reaches its designed stopping point.
    • Facing the front of the TF6, gently lift the dust cover along its hinge until it reaches its designed stopping point.

    Adicionar comentário

  2. Orient the retaining bracket upwards (away from the main body of unit).
    • Orient the retaining bracket upwards (away from the main body of unit).

    • Do not push the retaining bracket beyond its designed range of motion. It may snap if too much force is applied outside its limit.

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • With the retaining clip in its released position, pull the spout down towards the filter basket.

    Adicionar comentário

    • Carefully detach the dust cover by disengaging the locking pins, starting at one side.

    • Extra force may be required to disengage the dust cover's locking pins. Refrain from applying excessive upward force on the dust cover, as dong so may cause the pins to snap under pressure.

    Adicionar comentário

Conclusão

Follow these steps in reverse order with a new Dust Cover.

Jordan

Member since: 31-01-2014

201 reputação

2 Guides authored

Equipe

Cal Poly, Team 13-18, Regan Winter 2014 Membro de Cal Poly, Team 13-18, Regan Winter 2014

CPSU-REGAN-W14S13G18

4 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Todo: 256