Ir para o conteúdo principal

Moultrie I45 GameSpy Buttons Replacement

O que você precisa

  1. Moultrie I45 GameSpy Buttons Replacement, Casing: passo 1, imagem 1 %32
    • Using a Philips head screwdriver, remove the eight 6mm screws located at the bottom of the device.

  2. Moultrie I45 GameSpy Buttons Replacement: passo 2, imagem 1 %32
    • Remove the butterfly nut from the lid arm.

  3. Moultrie I45 GameSpy Buttons Replacement: passo 3, imagem 1 %32
    • Remove the lid-covering.

  4. Moultrie I45 GameSpy Buttons Replacement: passo 4, imagem 1 %32
    • Using a Phillips head screwdriver, remove the six 4mm screws from the face of the camera.

  5. Moultrie I45 GameSpy Buttons Replacement: passo 5, imagem 1 %32
    • Gently separate the two halves of the case.

    • The two halves are connected by a wire. Pulling too roughly can damage the wires and cause the camera to stop functioning.

  6. Moultrie I45 GameSpy Buttons Replacement, Buttons: passo 6, imagem 1 %32
    • Using a Phillips head screwdriver, remove the twelve 3mm screws from the circuit board.

  7. Moultrie I45 GameSpy Buttons Replacement: passo 7, imagem 1 %32
    • Gently remove the circuit board from the face of the camera.

  8. Moultrie I45 GameSpy Buttons Replacement: passo 8, imagem 1 %32
    • Remove the buttons.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Sean Hill

Membro desde: 01/29/15

485 Reputação

Autoria de 4 guias

Equipe

UW Tacoma, Team 3-7, Rose Winter 2015 Membro de UW Tacoma, Team 3-7, Rose Winter 2015

UWT-ROSE-W15S3G7

Membros da 3

Autoria de 4 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 414