Ir para o conteúdo principal

Motorola syn1654A Speaker Module Replacement

O que você precisa

  1. Motorola syn1654A Speaker Module Replacement, Speaker Module: passo 1, imagem 1 %32 Motorola syn1654A Speaker Module Replacement, Speaker Module: passo 1, imagem 2 %32
    • See the speaker replacement guide and follow steps 1 and 2.

  2. Motorola syn1654A Speaker Module Replacement: passo 2, imagem 1 %32
    • Use the T6 torx screwdriver to remove the seven screws located around the headphone cover and place the screws in a safe place.

    • To avoid stripping screws, be sure to use the right drill bit oriented perpendicular to the face of the screw.

  3. Motorola syn1654A Speaker Module Replacement: passo 3, imagem 1 %32
    • Carefully lift the speaker out of its housing while leaving all wires connected.

  4. Motorola syn1654A Speaker Module Replacement: passo 4, imagem 1 %32
    • Lift the module out of the headphone cup, leaving all wires attached.

    • Clip the two wires circled in orange.

    • Now that the speaker is free set it aside.

    • Clip the two wires circled in yellow.

    • Replace speaker module and solder it to the two wires circled in orange.

    • Now solder the speaker wires (circled in yellow) back to the module.

    • For soldering see the ifixit soldering guide: Como soldar e dessoldar contatos

Conclusão

To reassemble your device, follow these instructions in reverse order.

Ben

Membro desde: 02/24/14

104 Reputação

Autoria de 1 guia

Equipe

Michigan Tech, Team 5-1, Lauer Spring 2014 Membro de Michigan Tech, Team 5-1, Lauer Spring 2014

MTU-LAUER-S14S5G1

Membros da 2

Autoria de 3 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 240