Pular para o conteúdo principal

Introdução

This guide will show you how to install the Motorola Razr V3 camera. You may need to install a new camera if the camera doesn't show any picture or otherwise does not work.

Vídeo de Apresentação

  1. Remove the back cover by pressing down the silver button. Pull the cover away from the phone.
    • Remove the back cover by pressing down the silver button.

    • Pull the cover away from the phone.

  2. Remove the battery by pushing down on the top and pulling it away from the phone, similar to the cover. Remove the battery by pushing down on the top and pulling it away from the phone, similar to the cover.
    • Remove the battery by pushing down on the top and pulling it away from the phone, similar to the cover.

  3. Use tweezers to pry off all four rubber screw covers from the inside face, pulling them towards you.
    • Use tweezers to pry off all four rubber screw covers from the inside face, pulling them towards you.

    • Our phone is missing the two left screw covers, be careful not to lose yours too!

  4. kits de reparo de baterias de iPhone

    Only $29.99

    Buy Now

    kits de reparo de baterias de iPhone

    Only $29.99

    Buy Now
  5. Remove the four T5 Torx screws that were underneath the rubber covers.
    • Remove the four T5 Torx screws that were underneath the rubber covers.

  6. Use the plastic opening tool to pry the top cover away from the phone.
    • Use the plastic opening tool to pry the top cover away from the phone.

    • The side buttons on the phone may fall out when the top cover is separated from the phone. They can easily be put back by placing them in their original spot.

  7. Use tweezers to flip up the ZIF tab on the camera ribbon cable socket. Gently pull the camera ribbon cable out of the ZIF socket.
    • Use tweezers to flip up the ZIF tab on the camera ribbon cable socket.

    • Gently pull the camera ribbon cable out of the ZIF socket.

  8. Using a pair of tweezers gently grab and remove the camera from the phone.
    • Using a pair of tweezers gently grab and remove the camera from the phone.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Christian

Membro desde: 18-04-2013

149 reputação

2 Guias de autoria

Equipe

Cal Poly, Team 3-46, Amido Spring 2013 Membro de Cal Poly, Team 3-46, Amido Spring 2013

CPSU-AMIDO-S13S3G46

4 Membros

8 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 4

Todo: 1,240