Ir para o conteúdo principal

Introdução

Follow this guide to replace the kickstand on your Microsoft Surface Pro 7.

Some photos in this guide are from a different model and may contain slight visual discrepancies, but they won't affect the guide procedure.

Peças

Nenhum componente especificado.

  1. Microsoft Surface Pro 7 Kickstand Replacement, Open the kickstand: passo 1, imagem 1 %32 Microsoft Surface Pro 7 Kickstand Replacement, Open the kickstand: passo 1, imagem 2 %32 Microsoft Surface Pro 7 Kickstand Replacement, Open the kickstand: passo 1, imagem 3 %32
    • Lift the kickstand to expose the hinge screws.

  2. Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand screws: passo 2, imagem 1 %32 Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand screws: passo 2, imagem 2 %32
    • Remove the four 2.7 mm T3 screws—two on each side of the kickstand.

  3. Microsoft Surface Pro 7 Kickstand Replacement, Close the kickstand: passo 3, imagem 1 %32 Microsoft Surface Pro 7 Kickstand Replacement, Close the kickstand: passo 3, imagem 2 %32 Microsoft Surface Pro 7 Kickstand Replacement, Close the kickstand: passo 3, imagem 3 %32
    • Move the kickstand back down to a flat position.

    • The hinges are stiff and you may need to use some force to get it down.

  4. Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand: passo 4, imagem 1 %32 Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand: passo 4, imagem 2 %32 Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand: passo 4, imagem 3 %32
    • Remove the kickstand from the back cover.

    • There are two adhesive tabs in the middle of the kickstand that disengage most easily when the kickstand is pulled directly downward from the device.

    • Be sure to insert these tabs when reinstalling the new kickstand before replacing the screws.

Conclusão

To reassemble your device, follow the above steps in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Sam Omiotek

Membro desde: 25/02/2019

49.833 Reputação

264 Guias de autoria

Team

iFixit Membro de iFixit

Community

146 Membros

16.126 Guias de autoria

2 Comments

One of the hinges broke on my Surface Pro 6.

1. I removed the broken hinge, closed the kickstand and duct taped the seam.

2. I opened the kickstand wide and duct taped the seam.

The single hinge and duct tape seem to be working!

"Spare the duct tape, spoil the job." - Red Green

P Best - Responder

What are the parts used for this fix?

Andrea Shaw - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 15

Últimos 7 dias: 70

Últimos 30 dias: 286

Duração total: 2,181