Microsoft Surface Book 2 15" Motherboard Replacement

Introdução

This guide is used to explain how to open up the tablet portion of the Microsoft Surface Book 2 15 and gain access to the motherboard. The motherboard of the Microsoft Surface Book 2 15 has a majority of the cables for parts that can be replaced on it.

This is a difficult task to perform and can lead to other damage that can be done to the Microsoft Surface Book 2 15. A majority of the issues that are found with the Microsoft Surface Book 2 15 can be solved through software solutions. Therefore make sure to review troubleshooting page and try the solutions listed their before making any repairs to the device.

O que você precisa

Passo 1 Motherboard

Microsoft Surface Book 2 15" Motherboard Replacement, Motherboard: passo 1, imagem 1 %32

Open the laptop, then orient it towards yourself.
Count from the bottom up by six holes on the tablet portion of the laptop.

Editar

Passo 2

Take a paper clip and unfold it.
Place the paperclip in the sixth hole and push until you hear a click.
Once you hear the click, lift up on the right side of the tablet from the base until it separates.
After the right side has been detached, lift up the left side as well.

Editar

Passo 3

Place the tablet on a flat surface.
Using a heat gun or iOpener, heat up the edges of the screen to soften up the adhesive.

Editar

Passo 4

Using a plastic pick, slice underneath the edge of the screen.
Use a suction cup to carefully lift the screen and create separation between the screen and frame.
Take care not to insert the tool too far to avoid cutting the ribbon cables.
Slowly make your way around the screen, and carefully cut the adhesive that secures the screen to the frame.
Don't use a metal tool, that could damage the screen or internal parts.