Conserte seus objetos Comunidade Loja

Master and Dynamic MW50 Right/Left Speaker Replacement

Introdução

If your speaker is not producing sound correctly, it may be necessary to replace the speaker component. This guide will show the five steps for removing the speaker. Soldering is required for this replacement, If you don't know how to solder or desolder, click here for a great guide.

O que você precisa

  1. Master and Dynamic MW50 Right/Left Speaker Replacement, Master and Dynamic MW50 Disassembly: passo 1, imagem 1 %32 Master and Dynamic MW50 Right/Left Speaker Replacement, Master and Dynamic MW50 Disassembly: passo 1, imagem 2 %32 Master and Dynamic MW50 Right/Left Speaker Replacement, Master and Dynamic MW50 Disassembly: passo 1, imagem 3 %32

    • Pull the cushion off of the desired side by gripping the top of the headphones and pulling the cushion off.

    Editar

  2. Master and Dynamic MW50 Right/Left Speaker Replacement: passo 2, imagem 1 %32

    • Remove the four 5mm screws from the earpiece with a Y1 Triwing screwdriver.

    Editar

  4. Master and Dynamic MW50 Right/Left Speaker Replacement: passo 3, imagem 1 %32

    • Use the Jimmy to lift up the black cover to get inside the device.

    Editar

  5. Master and Dynamic MW50 Right/Left Speaker Replacement, Right/Left Speaker: passo 4, imagem 1 %32

    • Desolder the two wires connected to the speaker.

    Editar

  6. Master and Dynamic MW50 Right/Left Speaker Replacement: passo 5, imagem 1 %32

    • Use a heating gun to remove the glue from the speaker.

    • Once the glue is removed, gently pull out the speaker.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 4 outros contribuidores

Katie Dunnigan

Membro desde: 01/24/19

85 Reputação

Autoria de 1 guia

Emblemas: 3

Equipe

Cal Poly, Team S1-G4, White Winter 2019 Membro de Cal Poly, Team S1-G4, White Winter 2019

CPSU-WHITE-W19S1G4

Membros da 4

Autoria de 12 guias

Um comentário

This is awesome but Master & Dynamic don’t sell replacement 45mm 32 ohm drivers and won’t share the specs.

If anyone know where to get a replacement which will work well with these headphones please share!!!

paul

bloodygoose@icloud.com

psullivan_au - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 7

Últimos 30 dias: 12

Duração total: 652