Conserte seus objetos Comunidade Loja

Martian Victory Motherboard Replacement

Introdução

How to access and remove the motherboard of the Martian Smartwatch

O que você precisa

  1. Martian Victory Motherboard Replacement, Back Plate: passo 1, imagem 1 %32 Martian Victory Motherboard Replacement, Back Plate: passo 1, imagem 2 %32

    • Unscrew the four 3.4 mm flat head screws

    Editar

  2. Martian Victory Motherboard Replacement: passo 2, imagem 1 %32

    • Carefully lift the back plate off the watch. You will notice a lithium battery and rubber gasket attached to the back plate.

    Editar

  3. Martian Victory Motherboard Replacement, Lithium Battery: passo 3, imagem 1 %32

    • If not replacing lithium battery, skip down two steps.

    • Using the plastic removal tool, pry the battery from the backing plate. The battery is simply attached with glue.

    Editar

  5. Martian Victory Motherboard Replacement: passo 4, imagem 1 %32

    • Desolder the battery connections from the motherboard. Learn how to solder components here!

    Editar

  6. Martian Victory Motherboard Replacement, Motherboard: passo 5, imagem 1 %32

    • Use PH00 screw driver to remove two 2.4mm Phillips head screws.

    Editar

  7. Martian Victory Motherboard Replacement: passo 6, imagem 1 %32

    • Use a spudger or tweezers to remove a white sticker that covers a Phillips head screw.

    Editar

  8. Martian Victory Motherboard Replacement: passo 7, imagem 1 %32

    • Use PH00 screwdriver to remove 5.2mm Phillips head screw

    Editar

  9. Martian Victory Motherboard Replacement: passo 8, imagem 1 %32 Martian Victory Motherboard Replacement: passo 8, imagem 2 %32 Martian Victory Motherboard Replacement: passo 8, imagem 3 %32

    • Use ESD safe tweezers to remove the gold ribbon cable.

    • This will expose a second 5.2mm Phillips head screw that can be removed with a PH00 screwdriver.

    Editar

  10. Martian Victory Motherboard Replacement: passo 9, imagem 1 %32 Martian Victory Motherboard Replacement: passo 9, imagem 2 %32

    • Use a spudger to gently pry on the motherboard towards the top of the watch, being towards the 12 o'clock position to loosen the motherboard.

    • You can now access the parts and pieces on the bottom of, and below the motherboard.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 5 outros contribuidores

Dominic Coffey

Membro desde: 10/24/16

231 Reputação

Autoria de 2 guias

Emblemas: 13

+10 outros emblemas

Equipe

IUPUI, Team 3-3, Baechle Fall 2016 Membro de IUPUI, Team 3-3, Baechle Fall 2016

IUPUI-BAECHLE-F16S3G3

Membros da 4

Autoria de 8 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 178