Introdução

This repair guide will give instructions on how to remove the Macintosh PowerBook 1400c RAM.

Peças

Não são necessárias peças.

Turn the device upside down and then locate the battery latch near the front of the device.
  • Turn the device upside down and then locate the battery latch near the front of the device.

Adicionar comentário

Slide the latch to the left to release the battery.
  • Slide the latch to the left to release the battery.

Adicionar comentário

Continue holding the latch then gently pull the battery out of the device.
  • Continue holding the latch then gently pull the battery out of the device.

  • Place the battery in a safe location.

Adicionar comentário

Locate the CD-ROM Drive latch.
  • Locate the CD-ROM Drive latch.

Adicionar comentário

Slide the latch to the right to release the CD ROM drive.
  • Slide the latch to the right to release the CD ROM drive.

Adicionar comentário

Continue holding the latch then gently pull the CD-ROM Drive out of the device.
  • Continue holding the latch then gently pull the CD-ROM Drive out of the device.

  • Place the CD ROM drive in a safe location.

Adicionar comentário

Locate the speaker cover.
  • Locate the speaker cover.

Adicionar comentário

Press firmly on each end of the speaker cover and slide it to the left.
  • Press firmly on each end of the speaker cover and slide it to the left.

I found it was easy to get a spudger over the left edge and lift it up a bit, then push the bar to the left, It pops right off after that.

Jimmy James - Responder

Gently lift the speaker cover to remove it.
  • Gently lift the speaker cover to remove it.

Adicionar comentário

Lift the keyboard up from the back using a spudger(wedge side).
  • Lift the keyboard up from the back using a spudger(wedge side).

Adicionar comentário

Gently lift the keyboard until only the ribbon cable remains attached.
  • Gently lift the keyboard until only the ribbon cable remains attached.

Adicionar comentário

Tilt the keyboard away from the screen.
  • Tilt the keyboard away from the screen.

Adicionar comentário

Locate the six screws that secure the heatsink.
  • Locate the six screws that secure the heatsink.

This is not necessary to remove the HDD. Go directly to step 20.

Kenneth DeVries - Responder

That isn't the HDD!

Dix Dox - Responder

Remove the six screws from the heatsink using the Philips #1 screwdriver.
  • Remove the six screws from the heatsink using the Philips #1 screwdriver.

Adicionar comentário

Lift the heatsink from the side closest to the laptop screen.
  • Lift the heatsink from the side closest to the laptop screen.

Adicionar comentário

Remove the heatsink.
  • Remove the heatsink.

Adicionar comentário

Gently pull up on the beige ribbon lock until it moves a short distance on both sides to separate the ribbon cable from the connector.
  • Gently pull up on the beige ribbon lock until it moves a short distance on both sides to separate the ribbon cable from the connector.

Adicionar comentário

Detach the ribbon cable.
  • Detach the ribbon cable.

Adicionar comentário

Remove the keyboard.
  • Remove the keyboard.

Adicionar comentário

Identify RAM Memory stick
  • Identify RAM Memory stick

  • These are the upgradeable RAM Memory sticks, they must be removed first

Adicionar comentário

Gently grasp the ram on the far end as shown in the picture and then pull up and away from the right side of the computer
  • Gently grasp the ram on the far end as shown in the picture and then pull up and away from the right side of the computer

Adicionar comentário

Remove the upgradeable RAM stick
  • Remove the upgradeable RAM stick

  • If the upgradeable RAM stick is all you are repairing you can end the guide here, however to remove the factory installed RAM please continue

Adicionar comentário

Gently grasp the factory installed RAM by grabbing each end as shown in the picture and pull the stick directly up
  • Gently grasp the factory installed RAM by grabbing each end as shown in the picture and pull the stick directly up

Adicionar comentário

Remove the factory installed RAM memory module
  • Remove the factory installed RAM memory module

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

4 outras pessoas concluíram este guia.

Kian Dinyari

Member since: 07-04-2011

125 reputação

Autoria de 1 guia

Equipe

Cal Poly, Team 10-39, Forte Spring 2011 Membro de Cal Poly, Team 10-39, Forte Spring 2011

CPSU-FORTE-S11S10G39

5 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 5

Últimos 30 dias: 13

Todo: 2,808