Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Introdução

Accessing the RAM is easy and requires no tools. Use this guide to add or replace RAM for your Mac Pro.

  1. Lift the lever to unlock the case.
    • Lift the lever to unlock the case.

  2. Remove the side panel of the Mac Pro.
    • Remove the side panel of the Mac Pro.

    • Discharge any static electricity by touching a grounded surface prior to working on any internal components.

  3. Telas LCD de reposição iPhone (com ferramentas)

    A opção econômica, coberta por nossa garantia vitalícia.

    Confira os kits

    Telas LCD de reposição iPhone (com ferramentas)

    Reduza os custos de reparo, não a qualidade.

    Confira os kits
  4. Locate the two RAM trays at the bottom of the Mac Pro.
    • Locate the two RAM trays at the bottom of the Mac Pro.

  5. Pull the RAM tray out of the case by using both hands holding the edge of the ram board as shown. Make sure you give enough time for the computer to cool down before you remove any internal hardware parts.
    • Pull the RAM tray out of the case by using both hands holding the edge of the ram board as shown.

    • Make sure you give enough time for the computer to cool down before you remove any internal hardware parts.

  6. Push down on the ejectors on each side of a ram stick firmly and lift the RAM stick straight out carefully by holding each side. To insert a new RAM stick, place the RAM into the slot with the correct orientation and push on the stick using both hands until the ejectors are clicked into place. To insert a new RAM stick, place the RAM into the slot with the correct orientation and push on the stick using both hands until the ejectors are clicked into place.
    • Push down on the ejectors on each side of a ram stick firmly and lift the RAM stick straight out carefully by holding each side.

    • To insert a new RAM stick, place the RAM into the slot with the correct orientation and push on the stick using both hands until the ejectors are clicked into place.

Conclusão

To reassemble your device, follow these instructions in reverse order.

15 outras pessoas concluíram este guia.

Andrew Kim

Membro desde: 12-10-2014

1.062 Reputação

3 Guias de autoria

equipe

Cal Poly, Team 6-24, Maness Fall 2014 Membro de Cal Poly, Team 6-24, Maness Fall 2014

CPSU-MANESS-F14S6G24

4 Membros

9 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 28

Últimos 30 dias: 90

Duração total: 16,377