Logitech Webcam Pro 9000 Camera Replacement - Guia de Reparo iFixit

Introdução

This guide will lead you in desoldering the connections between the camera and the motherboard.

O que você precisa

Passo 1 Front and Back Cover

Logitech Webcam Pro 9000 Camera Replacement, Front and Back Cover: passo 1, imagem 1 %32

Logitech Webcam Pro 9000 Camera Replacement, Front and Back Cover: passo 1, imagem 2 %32

Remove the two 8 mm Phillips #0 screws on the back cover.
The motherboard connects the two covers together. DO NOT separate the two yet.
There is a button that loosens as the Phillips screws are removed. Don't be alarmed if it falls out.

Passo 2

Logitech Webcam Pro 9000 Camera Replacement: passo 2, imagem 1 %32

Logitech Webcam Pro 9000 Camera Replacement: passo 2, imagem 2 %32

Remove the four 6mm Phillips #0 screws connecting the motherboard and front cover.
DO NOT detach the wire connecting the motherboard to the front cover.

Passo 3 Camera

Logitech Webcam Pro 9000 Camera Replacement, Camera: passo 3, imagem 1 %32

Remove the two 8mm Phillips#0 screws on the back of the motherboard.

Passo 4

Logitech Webcam Pro 9000 Camera Replacement: passo 4, imagem 1 %32

Logitech Webcam Pro 9000 Camera Replacement: passo 4, imagem 2 %32

Logitech Webcam Pro 9000 Camera Replacement: passo 4, imagem 3 %32

Remove the camera from the motherboard by desoldering the two connections as shown.
Follow this link to learn how to properly solder and desolder your parts.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 9 outros contribuidores

nieko

Membro desde: 04/18/13

63 Reputação

Autoria de 2 guias

+3 outros emblemas

Equipe

Cal Poly, Team 12-34, Amido Spring 2013 Membro de Cal Poly, Team 12-34, Amido Spring 2013

CPSU-AMIDO-S13S12G34

Membros da 4

Autoria de 16 guias

0 comentários

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 4

Duração total: 2,352