Lite-On iHAS324 Chassis Replacement

Passo 1 Chassis

Lite-On iHAS324 Chassis Replacement, Chassis: passo 1, imagem 1 %32

Lite-On iHAS324 Chassis Replacement, Chassis: passo 1, imagem 2 %32

Insert a paper clip into a small hole on the right side of the faceplate bellow the disc tray.
There may be resistance, do not be afraid to use force.
The tray should then pop open.
Pull out the tray so that it is fully extended.

Editar

Pergunte ao FixBot

Passo 2

Lite-On iHAS324 Chassis Replacement: passo 2, imagem 1 %32

Lite-On iHAS324 Chassis Replacement: passo 2, imagem 2 %32

Lite-On iHAS324 Chassis Replacement: passo 2, imagem 3 %32

Use a plastic opening tool to push the three tabs located on the right, left, and bottom side of the outer chassis to loosen the faceplate off.

Editar

Pergunte ao FixBot

Passo 3

Lite-On iHAS324 Chassis Replacement: passo 3, imagem 1 %32

Pull the faceplate off the chassis.
Do NOT pull the faceplate all the way off the disc tray, because doing so can cause damage to the faceplate.
There may be resistance, do not be afraid to use force.

Editar

Pergunte ao FixBot

Passo 4

Lite-On iHAS324 Chassis Replacement: passo 4, imagem 1 %32

Using the Phillips Head #2 screwdriver, unscrew the two 8.5 mm screws located on the bottom back of the chassis.

Editar

Pergunte ao FixBot

Passo 5

Lite-On iHAS324 Chassis Replacement: passo 5, imagem 1 %32

Remove the bottom plate by lifting it off the device.

Editar

Pergunte ao FixBot

Passo 6

Lite-On iHAS324 Chassis Replacement: passo 6, imagem 1 %32

Turn the device over.
Remove the top plate by pulling the sides and lifting the plate off.

Editar