Ir para o conteúdo principal

Lenovo Yoga 900-13ISK Display Opening Prerequisite

Pré-requisito somente
Este guia destina-se apenas a ser usado como pré-requisito para outros guias. É incompleto por si só.

O que você precisa

  1. Lenovo Yoga 900-13ISK Display Opening Prerequisite, Display Opening Prereq: passo 1, imagem 1 %32
    • Apply heat along the bottom and left edges of the screen, either with a heat gun or iOpener.

    • Check out our iOpener Instructions if you need help!

  2. Lenovo Yoga 900-13ISK Display Opening Prerequisite: passo 2, imagem 1 %32 Lenovo Yoga 900-13ISK Display Opening Prerequisite: passo 2, imagem 2 %32
    • Insert an opening pick into the corner of the screen and slide it around slightly to create an opening.

  3. Lenovo Yoga 900-13ISK Display Opening Prerequisite: passo 3, imagem 1 %32 Lenovo Yoga 900-13ISK Display Opening Prerequisite: passo 3, imagem 2 %32 Lenovo Yoga 900-13ISK Display Opening Prerequisite: passo 3, imagem 3 %32
    • Insert a second opening pick and slide it along the side of the display, cutting away the adhesive.

  4. Lenovo Yoga 900-13ISK Display Opening Prerequisite: passo 4, imagem 1 %32
    • Use a heat gun or iOpener to apply heat to the top and side edge that have not yet been opened.

  5. Lenovo Yoga 900-13ISK Display Opening Prerequisite: passo 5, imagem 1 %32 Lenovo Yoga 900-13ISK Display Opening Prerequisite: passo 5, imagem 2 %32 Lenovo Yoga 900-13ISK Display Opening Prerequisite: passo 5, imagem 3 %32
    • Continue cutting away the adhesive on the top and side edges of the display.

  6. Lenovo Yoga 900-13ISK Display Opening Prerequisite: passo 6, imagem 1 %32 Lenovo Yoga 900-13ISK Display Opening Prerequisite: passo 6, imagem 2 %32 Lenovo Yoga 900-13ISK Display Opening Prerequisite: passo 6, imagem 3 %32
    • Open the display casing along the top edge.

  7. Lenovo Yoga 900-13ISK Display Opening Prerequisite: passo 7, imagem 1 %32 Lenovo Yoga 900-13ISK Display Opening Prerequisite: passo 7, imagem 2 %32 Lenovo Yoga 900-13ISK Display Opening Prerequisite: passo 7, imagem 3 %32
    • Pull the display cable out from the hinge mechanism.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Austin Blakely

Membro desde: 03/11/19

19.652 Reputação

Autoria de 53 guias

Equipe

iFixit Membro de iFixit

Staff

Membros da 136

Autoria de 17.446 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 3

Últimos 30 dias: 4

Duração total: 11