Introdução

This guide will explain how to remove and replace the keypad on an LG VX6100.

Push down on the gray "PUSH" button on the back side of the phone.
  • Push down on the gray "PUSH" button on the back side of the phone.

  • Slide the back case downward. Then, lift and remove the case.

Adicionar comentário

Lift up on the battery to remove it from the case.
  • Lift up on the battery to remove it from the case.

Adicionar comentário

  • Use a push-pin or tweezers to pry both of the tear-shaped screw covers out of the top of the phone.

Adicionar comentário

  • Use a Phillips #00 screwdriver to unscrew the six case screws from the back of the phone.

Adicionar comentário

  • Insert a plastic opener tool through the seam between the back case and the rest of the phone.

  • Slowly slide the tool along the seam. Lift up on the back case while you do this until the back case comes apart.

Adicionar comentário

  • Lift the bottom of the logic board out of the case.

  • Make sure not to lift the top of the logic board, since it is still connected to the backcase of the phone.

Adicionar comentário

  • Gently lift up on any edge of the white keypad to remove it from the phone case.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Teal

Member since: 17-04-2012

1 reputação

2 Guides authored

Equipe

Cal Poly, Team 12-39, Regan Spring 2012 Membro de Cal Poly, Team 12-39, Regan Spring 2012

CPSU-REGAN-S12S12G39

3 Membros

16 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 478