Introdução

This repair guide will instruct the user on the proper technique for removing and replacing a broken keypad for a LG 1010 Cell Phone.

  1. Turn off the cell phone and place face down on a flat surface.
    • Turn off the cell phone and place face down on a flat surface.

    Adicionar comentário

  2. While sliding the gray tab up, lift battery up and away from the cell phone.
    • While sliding the gray tab up, lift battery up and away from the cell phone.

    Adicionar comentário

    • Remove battery and set aside.

    Adicionar comentário

    • While holding cell phone firmly in one hand, unscrew and remove the antenna with the other hand.

    Adicionar comentário

    • Pull the antenna housing (black tube) towards bottom of phone and remove.

    Adicionar comentário

    • Unscrew the four screws on the back case using a T6 Torx Screwdriver.

    Adicionar comentário

    • Pull the back cover straight off the phone using your thumb and forefinger.

    Adicionar comentário

    • Pry off circuit board with a flathead screwdriver.

    Adicionar comentário

    • Pull out flexible keypad.

    Adicionar comentário

Conclusão

Install new keypad and reassemble following these instructions in reverse order.

2 outras pessoas concluíram este guia.

Nicholas Schmidt

Member since: 09-10-2010

97 reputação

7 Guides authored

Equipe

Cal Poly, Team 3-25, Regan Fall 2010 Membro de Cal Poly, Team 3-25, Regan Fall 2010

CPSU-REGAN-F10S3G25

4 Membros

14 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 775