Conserte seus objetos Comunidade Loja

Kyocera Hydro Life Charging Port Replacement

Introdução

This is a replacement guide for the charging port of the Kyocera Hydro Life. This guide requires specialized soldering knowledge and tools. Please ensure that you have these tools before attempting this guide.

O que você precisa

  1. Kyocera Hydro Life Charging Port Replacement, Charging Port: passo 1, imagem 1 %32 Kyocera Hydro Life Charging Port Replacement, Charging Port: passo 1, imagem 2 %32

    • Remove the back of the phone.

    Editar

  2. Kyocera Hydro Life Charging Port Replacement: passo 2, imagem 1 %32 Kyocera Hydro Life Charging Port Replacement: passo 2, imagem 2 %32 Kyocera Hydro Life Charging Port Replacement: passo 2, imagem 3 %32

    • Remove the battery by pulling up on the end and towards yourself.

    Editar

  3. Kyocera Hydro Life Charging Port Replacement: passo 3, imagem 1 %32

    • Use a PH0 screwdriver to remove the 6 screws which are holding the panel in the phone.

    Editar

  4. Kyocera Hydro Life Charging Port Replacement: passo 4, imagem 1 %32 Kyocera Hydro Life Charging Port Replacement: passo 4, imagem 2 %32 Kyocera Hydro Life Charging Port Replacement: passo 4, imagem 3 %32

    • Remove the frame from around the back of the phone.

    • Then remove the back panel of the phone.

    • Remove the white sticker from in the middle of the phone.

    Editar

  6. Kyocera Hydro Life Charging Port Replacement: passo 5, imagem 1 %32 Kyocera Hydro Life Charging Port Replacement: passo 5, imagem 2 %32 Kyocera Hydro Life Charging Port Replacement: passo 5, imagem 3 %32

    • Desolder the 7 pins.

    • If you have never soldered before, follow this guide.

    • This type of soldering requires very specialized and expensive equipment. Please be careful if you decide to continue following this guide.

    Editar

  7. Kyocera Hydro Life Charging Port Replacement: passo 6, imagem 1 %32 Kyocera Hydro Life Charging Port Replacement: passo 6, imagem 2 %32

    • Desolder the positive and negative terminals.

    Editar

  8. Kyocera Hydro Life Charging Port Replacement: passo 7, imagem 1 %32

    • Peel back the copper plated sticker.

    • If the copper plated sticker is broken, it must be replaced. If it is not broken during disassembly, it can be reused.

    Editar

  9. Kyocera Hydro Life Charging Port Replacement: passo 8, imagem 1 %32

    • Remove the motherboard without breaking it by placing it to the side. It will still be attached to the phone.

    Editar

  10. Kyocera Hydro Life Charging Port Replacement: passo 9, imagem 1 %32

    • Using force, remove the charging port from the charging slot.

    Editar

  11. Kyocera Hydro Life Charging Port Replacement: passo 10, imagem 1 %32

    • Replace the charging port and ribbon.

    • If the copper-plated sticker is damaged, it will need to be replaced as well.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 6

Últimos 30 dias: 9

Duração total: 990