Konica Minolta DiMAGE Z3 SD Memory Card Replacement

Participe da comunidade de reparos - Criar conta

Introdução

The SD Memory Card must be inserted for the camera to function. If a card has not been inserted, a "no-card" warning is displayed on the LCD monitor when the camera is turned on.

1. Passo 1 SD Memory Card
  Open the memory card chamber on the bottom panel of the camera.
  Editar
  
  Pergunte ao FixBot
  
  Comentar
  
  1024
2. Passo 2
  Push to eject the old memory card out of place.
  Editar
  
  Pergunte ao FixBot
  
  Comentar
  
  1024
4. Passo 3
  Insert the new memory card in. Make sure that it is inserted in the appropriate direction.
  Editar
  
  Pergunte ao FixBot
  
  Comentar
  
  1024
5. Passo 4
  Close the memory chamber and start the camera again.
  Editar
  
  Pergunte ao FixBot
  
  Comentar
  
  1024