Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Peças

Nenhum componente especificado.

  1. Use the flat end of a spudger to peel the ambient light sensor cable off of the frame. You will need to peel up the silver tape in the cable's lower right bend. The silver tape under the lower left bend of the cable does not need to come up with it. You will need to peel up the silver tape in the cable's lower right bend. The silver tape under the lower left bend of the cable does not need to come up with it.
    • Use the flat end of a spudger to peel the ambient light sensor cable off of the frame.

    • You will need to peel up the silver tape in the cable's lower right bend. The silver tape under the lower left bend of the cable does not need to come up with it.

  2. Use the flat end of a spudger to peel up the silver tape securing the antenna cable.
    • Use the flat end of a spudger to peel up the silver tape securing the antenna cable.

  3. Remove the five 3.6 mm Phillips #00 screws securing the frame and ambient light sensor.
    • Remove the five 3.6 mm Phillips #00 screws securing the frame and ambient light sensor.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Phillip Takahashi

Membro desde: 22/08/2011

81.328 Reputação

87 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 522