Conserte seus objetos Comunidade Loja

JBL Xtreme Charging Port Replacement

Introdução

This guide will show you how to remove the charging port of a JBL Xtreme. This guide requires soldering skills.

O que você precisa

  1. JBL Xtreme Charging Port Replacement, Cover: passo 1, imagem 1 %32

    • Locate the seams next to the 'feet' on the bottom side of the device.

    Editar

  2. JBL Xtreme Charging Port Replacement: passo 2, imagem 1 %32 JBL Xtreme Charging Port Replacement: passo 2, imagem 2 %32

    • Use the metal spudger to gently pry and lift the edge of the seam. The cover is held in place with plastic snaps that will make a popping noise when disengaged. !!Start with the back half, this will expose TWO Screws that need to be removed before lifting the front half.

    Editar

  3. JBL Xtreme Charging Port Replacement: passo 3, imagem 1 %32 JBL Xtreme Charging Port Replacement: passo 3, imagem 2 %32

    • For the first part of the case: gently pull back the edges of the case rotating along the hinge opposite the opening seam illustrated in the second photo. Plastic snaps hold the cover in place.

    • For the second part of the case: there are 2 screws to be removed at the seam. Once removed, the case will come off completely without forcing.

    Editar

  4. JBL Xtreme Charging Port Replacement, Bass Radiator: passo 4, imagem 1 %32 JBL Xtreme Charging Port Replacement, Bass Radiator: passo 4, imagem 2 %32 JBL Xtreme Charging Port Replacement, Bass Radiator: passo 4, imagem 3 %32

    • Unscrew the six 9.75mm Phillips head screws holding the bass radiator in place.

    • Three of the five outer screws are indicated in the first image and the sixth inner screw is indicated in the second image.

    Editar

  6. JBL Xtreme Charging Port Replacement: passo 5, imagem 1 %32 JBL Xtreme Charging Port Replacement: passo 5, imagem 2 %32 JBL Xtreme Charging Port Replacement: passo 5, imagem 3 %32

    • Once the screws have been removed, the bass radiator will easily lift free.

    • Both radiators are identical. Repeat the above steps on the opposite radiator if necessary.

    Editar

  7. JBL Xtreme Charging Port Replacement, Charging Port: passo 6, imagem 1 %32 JBL Xtreme Charging Port Replacement, Charging Port: passo 6, imagem 2 %32 JBL Xtreme Charging Port Replacement, Charging Port: passo 6, imagem 3 %32

    • Locate and disconnect the the three plugs indicated in these pictures.

    Editar

  8. JBL Xtreme Charging Port Replacement: passo 7, imagem 1 %32 JBL Xtreme Charging Port Replacement: passo 7, imagem 2 %32

    • Unplug the three ports from the previous step.

    • A set of tweezers may be helpful to reach deeper into the device.

    Editar

  9. JBL Xtreme Charging Port Replacement: passo 8, imagem 1 %32 JBL Xtreme Charging Port Replacement: passo 8, imagem 2 %32 JBL Xtreme Charging Port Replacement: passo 8, imagem 3 %32

    • Locate the three Phillips head screws inside the zipper compartment and unscrew them.

    • Pull the zipper panel free from the device.

    Editar

  10. JBL Xtreme Charging Port Replacement: passo 9, imagem 1 %32 JBL Xtreme Charging Port Replacement: passo 9, imagem 2 %32 JBL Xtreme Charging Port Replacement: passo 9, imagem 3 %32

    • Under the zipper panel are eight more Phillips head screws. Unscrew them and carefully lift the battery cover.

    • Be careful not to damage the small white ribbon cable which connects the battery cover to the rest of the device.

    Editar

  11. JBL Xtreme Charging Port Replacement: passo 10, imagem 1 %32 JBL Xtreme Charging Port Replacement: passo 10, imagem 2 %32

    • Unscrew the three 11.88mm Phillips head screws highlighted in the picture.

    Editar

  12. JBL Xtreme Charging Port Replacement: passo 11, imagem 1 %32 JBL Xtreme Charging Port Replacement: passo 11, imagem 2 %32

    • Pull the Auxiliary board out.

    • There is foam covering the wires, making it difficult to remove the Auxiliary board. Take your time with this step.

    Editar

  13. JBL Xtreme Charging Port Replacement: passo 12, imagem 1 %32 JBL Xtreme Charging Port Replacement: passo 12, imagem 2 %32 JBL Xtreme Charging Port Replacement: passo 12, imagem 3 %32

    • The first image highlights the charging port.

    • Locate 6 metal pins highlighted in the second image and use a solder iron to disconnect the pins.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

14 outras pessoas executaram este guia.

Autor(a)

com 3 outros contribuidores

Benny Huynh

Membro desde: 02/15/17

1.929 Reputação

Autoria de 4 guias

Emblemas: 14

+11 outros emblemas

Equipe

USF Tampa, Team 1-1, Sullivan Spring 2017 Membro de USF Tampa, Team 1-1, Sullivan Spring 2017

USFT-SULLIVAN-S17S1G1

Membros da 4

Autoria de 27 guias

Um comentário

Please I have a JBL XTREME that sparks each time I plug it. What could be the cause

morris_ugwoke - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 10

Últimos 7 dias: 57

Últimos 30 dias: 172

Duração total: 21,870