Ir para o conteúdo principal

JBL Clip 2 Audio AUX Cord Replacement

O que você precisa

  1. JBL Clip 2 Audio AUX Cord Replacement, Audio AUX Cord: passo 1, imagem 1 %32
    • Begin by removing the front cap of the JBL Clip 2 by using the blue plastic opening tool to get in between the creases.

    • If your JBL Clip 2 has never been opened this procedure will require moderate amount of force.

  2. JBL Clip 2 Audio AUX Cord Replacement: passo 2, imagem 1 %32
    • There will be six 3 mm T8 screws under the cap, remove these six screws. Save

    • If you are not trying to replace the speaker please ignore the two middle 3 mm T8 screws during this procedure.

  3. JBL Clip 2 Audio AUX Cord Replacement: passo 3, imagem 1 %32
    • The front cover will lift open easily and the components will be visible.

  4. JBL Clip 2 Audio AUX Cord Replacement: passo 4, imagem 1 %32
    • To completely remove the top portion, disconnect the speaker from the motherboard using the blue plastic opening tool.

    • While disconnecting be sure to not use too much force as these two parts are meant to become disconnected.

  5. JBL Clip 2 Audio AUX Cord Replacement: passo 5, imagem 1 %32
    • There will be four 3 mm T8 screws holding the motherboard in place, remove these four screws.

  6. JBL Clip 2 Audio AUX Cord Replacement: passo 6, imagem 1 %32
Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas executaram este guia.

Michael Hong

Membro desde: 02/01/17

1.014 Reputação

Autoria de 5 guias

Equipe

UW Tacoma, Team 2-2, Rose Winter 2017 Membro de UW Tacoma, Team 2-2, Rose Winter 2017

UWT-ROSE-W17S2G2

Membros da 4

Autoria de 7 guias

Um comentário

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 10

Últimos 30 dias: 29

Duração total: 3,605