Pular para o conteúdo principal

Introdução

Hate the look of halogen bulbs? Get rid of the dull yellow with a new set of LED license plate lights. Installation is very easy and will only take you a few minutes.

Ferramentas

Peças

Nenhum componente especificado.

  1. Take a flat head screwdriver and remove the license plate housing cover. Take a flat head screwdriver and remove the license plate housing cover.
    • Take a flat head screwdriver and remove the license plate housing cover.

  2. Remove the bulb housing.
    • Remove the bulb housing.

  3. Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  4. Remove the stock license plate bulb. Remove the stock license plate bulb.
    • Remove the stock license plate bulb.

  5. Directly replace with the new LED license plate bulb. If it doesn't light up, flip the LED bulb 180 degrees. Directly replace with the new LED license plate bulb. If it doesn't light up, flip the LED bulb 180 degrees.
    • Directly replace with the new LED license plate bulb. If it doesn't light up, flip the LED bulb 180 degrees.

  6. Put everything back the same way it was removed. Put everything back the same way it was removed. Put everything back the same way it was removed.
    • Put everything back the same way it was removed.

Conclusão

You can see from these instructions that installation was very easy. Enjoy your new LED license plate lights.

5 outras pessoas concluíram este guia.

Eric Wu

Membro desde: 21-01-2015

2.802 reputação

23 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 5

Últimos 30 dias: 23

Todo: 1,117