Ir para o conteúdo principal

Insignia Flex 8 Battery Replacement

O que você precisa

  1. Insignia Flex 8 Battery Replacement, Battery: passo 1, imagem 1 %32
    • Make sure the power is off to avoid injury in the following steps.

    • Position the tablet so that the screen is face down.

    • The power button is located in the upper left hand corner.

    • Hold the power button for three seconds until the tablet powers down.

  2. Insignia Flex 8 Battery Replacement: passo 2, imagem 1 %32 Insignia Flex 8 Battery Replacement: passo 2, imagem 2 %32
    • Remove the back casing by sliding a credit card or a similarly thin but firm object in between the casing and the screen.

    • Run this object around the perimeter of the tablet until there is separation between the casing and the screen.

    • Remove the back casing and set aside.

  3. Insignia Flex 8 Battery Replacement: passo 3, imagem 1 %32
    • Peel back the tape from battery and case.

  4. Insignia Flex 8 Battery Replacement: passo 4, imagem 1 %32
    • Slide the spudger beneath battery to pry away it away from the case. Work around the battery, prying up all edges to remove from glue.

    • Do not puncture or bend battery. This could cause battery to leak acid.

  5. Insignia Flex 8 Battery Replacement: passo 5, imagem 1 %32
    • Desolder the black, yellow and red connections from circuit board. Desoldering Help

    • Keep the soldering tool away from other components on the circuit board.

Conclusão

To reassemble your device, follow these instructions in reverse order.

4 outras pessoas executaram este guia.

Tyler Tyrrell

Membro desde: 03/11/15

890 Reputação

Autoria de 4 guias

Equipe

Colorado Springs, Team 5-5, Panko Spring 2015 Membro de Colorado Springs, Team 5-5, Panko Spring 2015

UCCS-PANKO-S15S5G5

Membros da 3

Autoria de 12 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 1

Últimos 30 dias: 7

Duração total: 9,096