Ferramentas

Não são necessárias ferramentas.

Peças

Não são necessárias peças.

  1. Turn over the Delphi MyFi XM2GO Device on its back to start the cover-removal process.
    • Turn over the Delphi MyFi XM2GO Device on its back to start the cover-removal process.

    Adicionar comentário

  2. Locate the large button on the top back of the device.
    • Locate the large button on the top back of the device.

    • Press this button at the top while making a firm grip on the battery cover.

    • As the button is pressed, move the cover towards the bottom of the device.

    • The battery removal tab may pop up during the cover removal process.

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Holding the device, grab the tab with thumb and index figure.

    • Pull down on the tab to move the battery block a few millimeters towards the bottom of the device to unlock the latch at the top.

    • After the latch at the top is disengaged, pivot the battery away from the back and the battery will be free.

    Adicionar comentário

    • After removing the battery cover and battery, the device information is located near the battery connections highlighted in red.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Scott Byer

Member since: 09-03-2012

61 reputação

5 Guides authored

Equipe

Clemson, Team 1-2, Benson Spring 2012 Membro de Clemson, Team 1-2, Benson Spring 2012

CLEM-BENSON-S12S1G2

3 Membros

9 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 1

Todo: 1,298