Ir para o conteúdo principal
Participe da comunidade de reparos - Criar conta

How to start a new guide

  1. How to start a new guide, Get into the guide maker: passo 1, imagem 1 %32
    • Click Fix Your Stuff, then click Repair guides. You should see this screen. Then Click Create a Guide.

  2. How to start a new guide, Setup Part 1: passo 2, imagem 1 %32
    • 2: Add your device in Device, on "What part are you replacing", type what you are replacing. and type a title. If you click Show More, you can type an introduction.

  3. How to start a new guide, Setup Part 2: passo 3, imagem 1 %32
    • Fill out the remaining setup, these are not necesarry but these help you be more specific:

    • Time Estimate: You can set the amount of time required to fix this product

    • Difficulty estimate: The difficulty estimate shown is Moderate, which is the default estimate. Can be configured to set a difficulty.

    • Prerequisite guides: Sometimes devices have hidden "prerequisite-only" guides that can be placed into your guide to avoid writing tons of steps. Also, you can use the the back cover/screen replacement guides as a starting Prerequisite. All prerequisites have to be in order.

    • Tools and Parts: You can add tools and/or parts to your guide.

    • Conclusion: Give the reader after-repair instructions.

Conclusão

Your'e all done setting up your guide! You can start posting steps.

redratchet21

Membro desde: 01/29/26

1.628 Reputação

Autoria de 13 guias

0Comentários do guia

Comentar

Visualizações:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 6

Ao todo: 29