How to Unclog a Keurig BVMC-KG5

Introdução

You may think your Keurig is broken and done for good, but it may just be clogged. Use this guide to unclog your Keurig coffee brewer in just a few easy steps. All you'll need is your coffee brewer, a paperclip, a bottle of white vinegar and approximately 30 minutes.

O que você precisa

Passo 1 How to Unclog a Keurig BVMC-KG5

How to Unclog a Keurig BVMC-KG5, How to Unclog a Keurig BVMC-KG5: passo 1, imagem 1 %32

Unplug your Keurig.

Editar

Passo 2

Disassemble all of the parts. This includes: water tank, lid, K-cup holder, and both pieces of the tray where the coffee cup sits.
You should not need a screwdriver for this. All of the parts you are disassembling are easily removable by hand.
Wash all of the parts in warm, soapy water. Dry well.

Editar

Passo 3

How to Unclog a Keurig BVMC-KG5: passo 3, imagem 3 %32

Unclog the needles using a slightly bent paperclip.
With the top of the Keuring open, insert the free end of the paperclip into the three small holes surrounding the needle that pierces the K-Cup.
Jiggle the paperclip to loosen any debris.

Editar

Passo 4

Wipe the whole machine down and reassemble all of the previously removed parts.

Editar

Passo 5

Fill the water tank with a half water-half vinegar solution.
Do not use straight vinegar. It can damage the machine's parts due to the acidity.
Run the water-vinegar solution through the machine until you have emptied the tank.
Run clean water through the machine. You may have to repeat this step several times to get all of the water-vinegar solution out of the pipes.