Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Introdução

Use this guide along with an oleophobic coating kit to restore the oleophobic coating on your device, or to add an oleophobic coating to your screen or screen protector. These kits can also be used to treat other glass surfaces, such as eye glasses, watches, smartwatches, and more.

The coating requires 8-12 hours to set, so it’s best to perform this procedure before bedtime.

What is an oleophobic coating?

Modern smartphones feature an oleophobic (oil-repellent) coating that protects the screen, improves smoothness, and reduces fingerprints. This coating consists of a thin layer of fluoropolymer-based solids (similar to Teflon) that is bonded to the glass.

Over time and use, this coating will wear off, and you may notice parts of the screen getting greasy or dirty with fingerprints more easily.

  1. Use isopropyl alcohol to thoroughly clean the surface you are planning to apply the coating to. Wipe the screen dry with a clean microfiber cloth.
    • Use isopropyl alcohol to thoroughly clean the surface you are planning to apply the coating to.

    • Wipe the screen dry with a clean microfiber cloth.

  2. Read the next three steps before you attempt the procedure. The oleophobic coating's liquid solvent evaporates very quickly when applied, so you'll need to work quickly. Wrap one finger in a bit of plastic. You can use a sandwich bag or some plastic wrap. You will use this covered finger to rub the coating liquid onto the screen. This will prevent your finger from absorbing the liquid.
    • Read the next three steps before you attempt the procedure. The oleophobic coating's liquid solvent evaporates very quickly when applied, so you'll need to work quickly.

    • Wrap one finger in a bit of plastic. You can use a sandwich bag or some plastic wrap.

    • You will use this covered finger to rub the coating liquid onto the screen. This will prevent your finger from absorbing the liquid.

  3. Kits para o Nintendo Switch

    Um reparo rápido para reiniciar o jogo

    Confira kits para o Nintendo Switch

    Kits para o Nintendo Switch

    Um reparo rápido para reiniciar o jogo

    Confira kits para o Nintendo Switch
  4. Apply 10-15 drops of the oleophobic coating liquid onto the surface. If you are coating a large surface such as a large phone or tablet, apply ten drops to a portion of the screen, and work on one portion at a time. If you are coating a large surface such as a large phone or tablet, apply ten drops to a portion of the screen, and work on one portion at a time.
    • Apply 10-15 drops of the oleophobic coating liquid onto the surface.

    • If you are coating a large surface such as a large phone or tablet, apply ten drops to a portion of the screen, and work on one portion at a time.

  5. Wipe your plastic-covered finger over the surface with quick, light swipes until the liquid evaporates. You don't need to rub very hard—you're just spreading out the coating molecules onto the surface before the solvent evaporates. If you applied the liquid to only a portion of the surface, repeat the liquid application and rubbing procedure to the remaining surface.
    • Wipe your plastic-covered finger over the surface with quick, light swipes until the liquid evaporates.

    • You don't need to rub very hard—you're just spreading out the coating molecules onto the surface before the solvent evaporates.

    • If you applied the liquid to only a portion of the surface, repeat the liquid application and rubbing procedure to the remaining surface.

  6. Do not touch the surface for 8-12 hours in order to allow the coating to bond to the surface.
    • Do not touch the surface for 8-12 hours in order to allow the coating to bond to the surface.

    • For best results, apply the coating before bedtime, so it has all night to bond.

    • Afterward, you can wipe off any residue remaining on the touch screen with a clean microfiber cloth.

    • Repeat this process 2-3 times to fully maximize the oleophobic coating performance and film durability.

Conclusão

Done properly, this results in a perfect oleophobic coating on your device.

Your device will still collect some fingerprints, but the oil left behind by your fingers will be greatly reduced, and easier to wipe off.

Reapply the coating every 1-2 months or as needed.

202 outras pessoas concluíram este guia.

Arthur Shi

Membro desde: 03/01/2018

116.494 Reputação

340 Guias de autoria

Equipe

iFixit Membro de iFixit

Community

126 Membros

11.884 Guias de autoria

Very interesting guide. Awesome.

Do I have to remove the coating that is on the device when it's new?

Especially when the coating has some very small scratches?

And if yes, how to remove it?

Thanks

Peter Gordon - Responder

I recommend avoiding this for the iPhone 6. The curved screen simply directs the liquid into the casing.

Alex Pappajohn - Responder

Tried this with my iPhone 6. Seems to work pretty well. I'll do a few more quotes. I noticed this actually had a beneficial effect on screen scratches. Filled them in pretty well, blends with the screen more.

Talk about a happy accident!

ckeyser - Responder

one comment says not to use it with iPhone 6 and another one says it worked ok, so what do I do? is it any dangerous? because I bought it before your last comments but I still havent used it since I'm worried about what can happen

Salvador Martinez -

The part of the instructions that are a problem is testing with drops of water - The case of the phone might catch these drops and allow them inside the phone. Just don’t test it with drops of water and you’ll be fine.

Robert Backhaus -

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 115

Últimos 7 dias: 715

Últimos 30 dias: 3,431

Duração total: 354,865