Pular para o conteúdo principal

Introdução

Using this guide you can fix this toy in 15-20 minutes without having to buy a new one. There are several tools you will need to fix this Little Tikes Bubble Mower. You will need a Philips screw driver size PH1, and a soldering tool. (If you don't know how to solder, look at iFixit's How to Solder and Desolder connections.)

  1. Start with a flat, open space to work.
    • Start with a flat, open space to work.

  2. Unscrew these three 1.2 mm screws. Unscrew these three 1.2 mm screws.
    • Unscrew these three 1.2 mm screws.

  3. Remove the Bubble Sprocket from the motor.
    • Remove the Bubble Sprocket from the motor.

  4. Unscrew these four 1.2mm screws holding the plate on.
    • Unscrew these four 1.2mm screws holding the plate on.

  5. Remove the plate.
    • Remove the plate.

  6. Connect the red wire to the top right pin.
    • Connect the red wire to the top right pin.

  7. Solder the Red wire to the metal pin.
    • Solder the Red wire to the metal pin.

    • (Warning Soldering is very hot!)

  8. Connect the yellow wire to the bottom right pin. Solder the yellow wire to the bottom right pin.
    • Connect the yellow wire to the bottom right pin.

    • Solder the yellow wire to the bottom right pin.

    • (Warning Soldering iron is very hot!)

  9. Replace the plate over the wires.
    • Replace the plate over the wires.

  10. Put four 1.2 mm screws for the plate back into place.
    • Put four 1.2 mm screws for the plate back into place.

  11. Put three 1.2mm screws for the motor back into place.
    • Put three 1.2mm screws for the motor back into place.

  12. Insert the Bubble sprocket onto the motor.
    • Insert the Bubble sprocket onto the motor.

  13. You are now finished!
    • You are now finished!

Linha de Chegada

John Hiller

Membro desde: 05-10-2015

110 reputação

Autoria de 1 guia

Equipe

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 7

Últimos 30 dias: 19

Todo: 861