Introdução
Use this guide to open your Huawei Watch GT 2 (42 mm) for repairs.
O que você precisa
-
-
Before starting the repairs, take your watch off the charger and power it down.
-
Remove the watch band.
-
-
-
Use a T2 Torx screwdriver to remove the four 3.6 mm screws securing the back cover assembly.
-
-
-
-
Insert an opening tool in the seam on the top edge between the back cover assembly and the watch case.
-
Use the opening tool to pry up the back cover assembly of your Huawei Watch GT 2 (42 mm).
-
-
-
Carefully swing the back cover assembly open to an upward position.
-
To reassemble your Huawei Watch GT 2 (42 mm), follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Opening didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for troubleshooting help.
To reassemble your Huawei Watch GT 2 (42 mm), follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Opening didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for troubleshooting help.
