Introdução

The power switch allows the Hoover Power Path Pro Advanced to turn on with the press of the power button. A defective power switch will not allow the user to control the on and off state of the device and needs to be replaced.

Peças

Não são necessárias peças.

  1. Remove the lower brushroll from the bottom of the cleaner.
    • Remove the lower brushroll from the bottom of the cleaner.

  2. Use a long #2 Philips head to remove the 8 numbered screws on the bottom of the cleaner (They will also be indicated on the bottom of the vacuum).
    • Use a long #2 Philips head to remove the 8 numbered screws on the bottom of the cleaner (They will also be indicated on the bottom of the vacuum).

  3. Pull the red handle to remove the front suction unit from the cleaner. Pull the red handle to remove the front suction unit from the cleaner.
    • Pull the red handle to remove the front suction unit from the cleaner.

  4. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  5. Unscrew the hose by using a Phillips #2 to detach it from the top cover of the cleaner.
    • Unscrew the hose by using a Phillips #2 to detach it from the top cover of the cleaner.

  6. Push down on the handle release button. Lift the edge of top cover connected to this button. Repeat the above step for the "On/Off" button.
    • Push down on the handle release button. Lift the edge of top cover connected to this button.

    • Repeat the above step for the "On/Off" button.

    • Pull entire top cover off.

    • Caution: when pulling the handle release button, make sure the top of the cleaner does not fall.

  7. Remove the "On/Off" cap by pulling it upwards with caution.
    • Remove the "On/Off" cap by pulling it upwards with caution.

  8. Use a long #2 Philips head to remove the two screws from the arched grey piece.
    • Use a long #2 Philips head to remove the two screws from the arched grey piece.

  9. Pull out the red power the red power switch. Pull out the red power the red power switch.
    • Pull out the red power the red power switch.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Jose Andres Gonzalez Valdes

Member since: 22-01-2018

658 reputação

5 Guides authored

Equipe

Cal Poly, Team S16-G5, Banghart Winter 2018 Membro de Cal Poly, Team S16-G5, Banghart Winter 2018

CPSU-BANGHART-W18S16G5

5 Membros

9 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 6

Últimos 30 dias: 46

Todo: 502