Conserte seus objetos Comunidade Loja

Hipstreet Equinox 2 Motherboard Replacement

Introdução

If your motherboard gets broken by a bad fall or damage while replacing another part it will need to be replaced. Please note that all data is on the motherboard so you will lose your data.

O que você precisa

  1. Hipstreet Equinox 2 Motherboard Replacement, Rear Case: passo 1, imagem 1 %32

    • Remove the two 3mm screws using a PH00 screwdriver.

    Editar

  2. Hipstreet Equinox 2 Motherboard Replacement: passo 2, imagem 1 %32

    • Use the blue plastic opening tool to gently pry the back case off.

    Editar

  4. Hipstreet Equinox 2 Motherboard Replacement, Motherboard: passo 3, imagem 1 %32

    • Unsolder these wires from the motherboard, it is a good idea to label these wires as you remove them according to the picture to the left.

    Editar

  5. Hipstreet Equinox 2 Motherboard Replacement: passo 4, imagem 1 %32

    • Remove contact strips by lifting gently on the clip indicated in this picture, then pulling strip out of the clip.

    Editar

  6. Hipstreet Equinox 2 Motherboard Replacement: passo 5, imagem 1 %32

    • Remove the 3.5mm screws located at these locations shown on the picture by using the PH00 screwdriver.

    Editar

  7. Hipstreet Equinox 2 Motherboard Replacement: passo 6, imagem 1 %32

    • Gently lift the motherboard out of the tablet, make sure no wires are still caught or attached while you lift the motherboard.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 5 outros contribuidores

Brandon Snodgrass

Membro desde: 01/29/15

410 Reputação

Autoria de 4 guias

Emblemas: 6

+3 outros emblemas

Equipe

Clemson, Team 15-8, Shirley Winter 2015 Membro de Clemson, Team 15-8, Shirley Winter 2015

CLEM-SHIRLEY-W15S15G8

Membros da 5

Autoria de 12 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 354