Introdução
After using this guide you will learn how to replace the blades in your blender. You will need to use basic tools to complete this guide.
O que você precisa
-
-
Remove the lid from the container by holding the base and pulling up on the lid.
Pergunte ao FixBot
-
-
-
Remove the container from the blender.
-
Hold the blender and the container, then twist the container in a clockwise motion.
-
-
-
-
Using a pair of pliers to hold the blade in place, use your other hand to unscrew the rubber piece on the bottom of the container.
-
Remove the rubber piece and the two washers by rotating the rubber piece counter-clockwise.
-
-
-
Using the pliers, remove blades and the washer around the blade shaft.
-
To reassemble your device with the new blade assembly, follow these instructions in reverse order.
Cancelar: não concluí este guia.
7 outras pessoas executaram este guia.
Equipe
USF Tampa, Team 2-5, Sullivan Fall 2015 Membro de USF Tampa, Team 2-5, Sullivan Fall 2015
USFT-SULLIVAN-F15S2G5
4 Membros
Autoria de 11 guias
3Comentários do guia
Need to know how to install parts and how many
Looks like I missed parts need to know the order son cuantaty
For my 501101B blender, the whole blade assembly popped out, so the blended smoothie draws at the bottom like a water falls How to fix this?
