Peças

Não são necessárias peças.

Open the printer's mouth by pulling the two mouth pieces down.
  • Open the printer's mouth by pulling the two mouth pieces down.

  • Lift the flap covering the scanner. When you are finished, the printer should appear as shown.

Adicionar comentário

Remove the flap for the scanner by pulling lightly on the clip that attaches it to the printer.
  • Remove the flap for the scanner by pulling lightly on the clip that attaches it to the printer.

  • The clip may be damaged by applying too much force.

Adicionar comentário

Remove the three screws from the top of the printer using a T9 screwdriver as shown. The screws are located in the far-left, far-right, and near-right corners of the printer, with respect to the front view. The screws are located in the far-left, far-right, and near-right corners of the printer, with respect to the front view.
  • Remove the three screws from the top of the printer using a T9 screwdriver as shown.

  • The screws are located in the far-left, far-right, and near-right corners of the printer, with respect to the front view.

Adicionar comentário

Reach into the mouth of the printer and press the clip behind the power button to release the power button face.
  • Reach into the mouth of the printer and press the clip behind the power button to release the power button face.

Adicionar comentário

A picture of the removed power button is provided to show the location of the clip that needs to be pressed.
  • A picture of the removed power button is provided to show the location of the clip that needs to be pressed.

  • After pressing the clip, pull out the face of the power button by sliding it from the right to the left side.

Adicionar comentário

The power button face has a plastic holder that attaches the power button  and the wireless button to the face plate using two slots. Loosen the plastic holder by pulling the slots on the face plate away from the plastic holder. Remove the plastic holder from the face plate after the slots are loosened.
  • The power button face has a plastic holder that attaches the power button and the wireless button to the face plate using two slots.

  • Loosen the plastic holder by pulling the slots on the face plate away from the plastic holder.

  • Remove the plastic holder from the face plate after the slots are loosened.

Adicionar comentário

The plastic holder secures the power button by two slots. Using a spudger, push the holders inward to detach the button from the plastic holder. Using a spudger, push the holders inward to detach the button from the plastic holder.
  • The plastic holder secures the power button by two slots.

  • Using a spudger, push the holders inward to detach the button from the plastic holder.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Tim Wise

Member since: 01-04-2011

170 reputação

7 Guides authored

Equipe

Cal Poly, Team 10-38, Forte Spring 2011 Membro de Cal Poly, Team 10-38, Forte Spring 2011

CPSU-FORTE-S11S10G38

5 Membros

10 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 5

Todo: 3,126