Introdução

The screen is one of the most commonly damaged components of the HP Elite x2 1012 G2. Additionally, this guide is an important prerequisite to all other repairs on this device. Thankfully, removal and repair of the screen is relatively easy.

Make sure the device is turned off before starting.
  • Make sure the device is turned off before starting.

  • Orient the device so the back is facing you, with the kickstand up.

Adicionar comentário

Remove the six 3mm Torx T5 screws underneath the kickstand.
  • Remove the six 3mm Torx T5 screws underneath the kickstand.

Adicionar comentário

  • Turn the device over so the screen is facing you.

  • Place a suction cup firmly onto a corner of the screen.

  • Lift up gently until you see the screen separate from the casing.

  • Repeat this process for all four corners.

Adicionar comentário

  • Lift the screen up and off of the device.

  • Pry each corner up first, otherwise you may damage or crack the screen.

Adicionar comentário

  • Remove the two connectors on the back of the screen by lifting the connector tabs on the motherboard with a plastic opening tool and pulling gently.

Adicionar comentário

  • Remove the screen by gently lifting it off of the device.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Noah Stapp

Member since: 18-04-2018

425 reputação

2 Guides authored

Equipe

Cal Poly, Team S18-G5, Livingston Spring 2018 Membro de Cal Poly, Team S18-G5, Livingston Spring 2018

CPSU-LIVINGSTON-S18S18G5

4 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 9

Últimos 30 dias: 59

Todo: 233