Pular para o conteúdo principal

Introdução

You are going to remove the back cover, locate the RAM, take out the RAM, and either replace it or reinstall it.

  1. Place the laptop so the back cover is facing up.
    • Place the laptop so the back cover is facing up.

  2. Remove the 8 screws from the back cover using the Phillips #00 screwdriver.
    • Remove the 8 screws from the back cover using the Phillips #00 screwdriver.

  3. Lift off the cover.
    • Lift off the cover.

  4. kits de reparo de baterias de iPhone

    Only $29.99

    Buy Now

    kits de reparo de baterias de iPhone

    Only $29.99

    Buy Now
  5. Identify the RAM, which is a stack of two green cards in the upper left-hand corner.
    • Identify the RAM, which is a stack of two green cards in the upper left-hand corner.

  6. There are silver tabs on both sides of the ram. Simultaneously push the silver tabs outward.
    • There are silver tabs on both sides of the ram. Simultaneously push the silver tabs outward.

  7. The card pops up 20 degrees and is loose enough to remove with your hand.
    • The card pops up 20 degrees and is loose enough to remove with your hand.

    • Carefully pull the card to the right horizontally.

  8. Follow the same steps for the second RAM card, which is under the one you just removed.
    • Follow the same steps for the second RAM card, which is under the one you just removed.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Toni Pipes

Membro desde: 05-10-2010

297 reputação

7 Guias de autoria

Equipe

Cal Poly, Team 21-31, Regan Fall 2010 Membro de Cal Poly, Team 21-31, Regan Fall 2010

CPSU-REGAN-F10S21G31

4 Membros

7 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 4,114