Introdução

Replacing the speaker in a Garmin Nuvi 200.

Peel off the sticker from the bottom of the device to reveal two screws.
  • Peel off the sticker from the bottom of the device to reveal two screws.

Adicionar comentário

Remove two T5 Torx screws.
  • Remove two T5 Torx screws.

Adicionar comentário

  • Insert a plastic opening tool in the gap between the front and rear casing.

  • Carefully work the tool around the gap, separating the two halves of the case.

    • Keep the power switch in place while removing the rear case.

Adicionar comentário

  • Unscrew the two screws on opposite sides of the speaker using the #00 Phillips screwdriver.

there is no use showing how to replace a speaker in nuvi if we cant find any

seems like a god dam mistery

Jean Michel Tche - Responder

  • Pull the cable out to detach the speaker from the logic board.

Adicionar comentário

  • Wedge the iPod opener into the space between the speaker and the case.

  • Apply pressure to pry the speaker away from the case.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas concluíram este guia.

Anjelica

Member since: 11-04-2010

504 reputação

3 Guides authored

Equipe

Cal Poly, Team 25-90, Amido Spring 2010 Membro de Cal Poly, Team 25-90, Amido Spring 2010

CPSU-AMIDO-S10S25G90

4 Membros

9 Guides authored

just a note i had a problem with the speaker in my nuvi 200 an upon opening up found speaker plug had come loose i guess from being dropped a few times pushed plug in an works fine please check all connections before replacing your speaker saved me $$ thanks for a great site everyone...

randaleholland - Responder

Where can you buy replacement speakers for the Garmin units?

Brat Fry - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 3

Últimos 30 dias: 11

Todo: 6,443