Conserte seus objetos Comunidade Loja

GameSir X2 Type-C USB-C Port Replacement

Introdução

The USB-C Plug connects the mobile phone to the GameSir X2 Type-C and is the only source of connection from the mobile phone to the controller. GameSir designed the USB-C plug to pivot 51 degrees to prevent damage to mobile phone charging ports while inserting and removing the device.

If your phone fails to connect to the Gamesir X2 Type-C, the USB-C plug may need replaced. Follow this guide to replace the plug. Before replacing the plug, review the troubleshooting page. More than likely a bad connection can be fixed without replacing the USB-C plug.

O que você precisa

  1. GameSir X2 Type-C USB-C Port Replacement, Back Cover: passo 1, imagem 1 %32 GameSir X2 Type-C USB-C Port Replacement, Back Cover: passo 1, imagem 2 %32

    • Turn the device so the back faces you.

    Editar

  2. GameSir X2 Type-C USB-C Port Replacement: passo 2, imagem 1 %32 GameSir X2 Type-C USB-C Port Replacement: passo 2, imagem 2 %32

    • Remove the eight 6 mm T6 Torx screws.

    Editar

  3. GameSir X2 Type-C USB-C Port Replacement: passo 3, imagem 1 %32

    • Use a straight edge to remove the rubber pad on the front of the device.

    Editar

  5. GameSir X2 Type-C USB-C Port Replacement: passo 4, imagem 1 %32 GameSir X2 Type-C USB-C Port Replacement: passo 4, imagem 2 %32

    • Remove the four 4.5 mm screws with a Phillips #000 screwdriver.

    Editar

  6. GameSir X2 Type-C USB-C Port Replacement: passo 5, imagem 1 %32 GameSir X2 Type-C USB-C Port Replacement: passo 5, imagem 2 %32

    • Use a straight edge to pry open the controller, following the seam on the controller.

    • Some force is necessary, but be careful not to damage any of the clips holding the controller together.

    Editar

  7. GameSir X2 Type-C USB-C Port Replacement, USB-C Port: passo 6, imagem 1 %32 GameSir X2 Type-C USB-C Port Replacement, USB-C Port: passo 6, imagem 2 %32

    • Remove the two 6mm Phillips head screws.

    Editar

  8. GameSir X2 Type-C USB-C Port Replacement: passo 7, imagem 1 %32 GameSir X2 Type-C USB-C Port Replacement: passo 7, imagem 2 %32

    • Gently remove the plastic bracket from the plug.

    Editar

  9. GameSir X2 Type-C USB-C Port Replacement: passo 8, imagem 1 %32 GameSir X2 Type-C USB-C Port Replacement: passo 8, imagem 2 %32 GameSir X2 Type-C USB-C Port Replacement: passo 8, imagem 3 %32

    • Identify where the ribbon wire connects to to the motherboard.

    • Flip the black locking ZIF flap holding the ribbon wire in place to the upward position.

    • Gently remove the ribbon cable away from the motherboard socket.

    Editar

  10. GameSir X2 Type-C USB-C Port Replacement: passo 9, imagem 1 %32 GameSir X2 Type-C USB-C Port Replacement: passo 9, imagem 2 %32 GameSir X2 Type-C USB-C Port Replacement: passo 9, imagem 3 %32

    • Once the cover is off of the plug and the ribbon wire is released from the flap, gently pull the USB-C plug away from the device.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 10

Últimos 7 dias: 22

Últimos 30 dias: 95

Duração total: 116